Suspension, Wheels & Recovery Gear Fitted on the Sunshine Coast

This is the hub for everything that decides how a loaded ute sits, rides and gets itself out of trouble: springs and shock absorbers, load levelling airbags, certified GVM upgrades, winches, recovery gear and the rated points that make a recovery safe. They belong together because they are one system. A lift kit changes how the vehicle carries weight, the weight decides whether it gets stuck, and the recovery gear is what you reach for when it does.

Suspension - what the options actually do

A lift kit raises ride height for clearance and larger tyres, usually 40 to 50mm on a dual cab, which is where most kits stop because beyond that the driveline angles and the ADR height rules start working against you. A load-carrying kit may not lift much at all; it is rated to hold a constant load level rather than to gain clearance, and that is the right kit for a tradesman's ute or a permanent canopy build. Load levelling airbag suspension sits inside or beside the existing springs and is adjusted by pressure, which is the sensible answer for a ute that is empty on Monday and towing a van on Friday - but it manages load, it does not raise your legal limit. That is what a certified GVM upgrade does, and we do those both pre-registration and post-registration. Shock absorbers are the part people under-think: twin-tube units are quiet and comfortable, monotube and remote-reservoir shocks shed heat on long corrugations and are worth it if you genuinely spend time on dirt.

Winches and recovery

Electric winch capacity should be roughly twice the vehicle's loaded weight, which puts most dual cabs at 9,500 to 12,000lb. Synthetic rope is lighter, safer when it fails and easier to handle than steel cable, but it needs a different fairlead and does not like heat or grit. A winch also needs a bull bar with a winch cradle, a battery and charging system that can hold up under load, and rated recovery points bolted to the chassis - the factory tie-down hooks on a ute are not recovery points, and using them is how people get hurt. Snatch straps, soft shackles, recovery tracks, a damper and a set of gloves finish the kit. We stock Runva winches and Carbon Offroad recovery gear, alongside Lovells, Outback Armour, Tough Dog, Dobinsons, EFS 4x4, ORI and Polyair for suspension, and Campboss and Outback Kitters for the touring hardware around it. We are an authorised dealer for all of them and everything we supply is ADR compliant.

Vehicles covered

Ford Ranger and Raptor, Toyota HiLux, Isuzu D-MAX and MU-X, Toyota LandCruiser 79, 200 and 300 Series and Prado, Mitsubishi Triton, Mazda BT-50, Volkswagen Amarok, Nissan Navara and Ford Everest, plus RAM 1500, RAM 2500 and 3500 and the Chevrolet Silverado. American trucks in particular are worth a conversation before ordering - spring rates and kit availability differ a long way from the local dual cabs, and not every kit that fits the truck is certified for it here.

Supplied, fitted and aligned at Warana

Suspension is the category where fitting quality shows up fastest. We fit in our own workshop at 4/43 Premier Circuit, Warana, on the Sunshine Coast, and a suspension job leaves here corner-weighted where the kit calls for it, torqued to spec and wheel-aligned afterwards - an alignment is not optional after a lift, and skipping it is why some lifted utes chew out a set of front tyres in a few thousand kilometres. Customers come through from Kawana, Caloundra, Maroochydore, Mooloolaba, Buderim, Nambour, Noosa, Gympie and Caboolture, and we deliver nationwide for owners doing their own fitting. Tell us what the ute carries, what it tows and where it actually goes, and we will spec it around that rather than around a catalogue.